Vacuum Control and Regulation

To achieve maximum efficiency and performance from a vacuum system it requires accurate measurement or regulation.
The Vuototecnica range of vacuum control & regulation components are probably the best available in the market today.

Pilot Operated 3-way Vacuum Valve

This range of valves operate using a pneumatic pilot and a spring return. Pressure of up to 8bar(g) is applied to the pilot port of the valve (1/8"BSP). The valve will then change position. When the pilot pressure is relieved a strong steel spring will return the valve to it's original position. These valves are manufactured from a solid Aluminium billet (anodised) and a stainless steel spool. Over sized orifices are standard on these valves for maximum flow performance. Port sizes up to 1 1/2"BSP.

PDF data sheet 4_08.pdf

2 and 3 way Vacuum Solenoid Valves

16 Series (3/2) & 20 Series (2/2) - These valves are direct acting with a solenoid. When power is applied to the solenoid via a coil (supplied) the valve will change position. When power is removed from the coil the internal spring will return the valve to it's original position. Over sized orifices are standard on these valves for maximum flow performance. Port sizes up to 1/2"BSP.

 

PDF data sheet 4_08.pdf

3-Way Vacuum Solenoid Valves

10 Series - These valves are solenoid / spring return. The valve requires a continuous pneumatic pressure on the pilot port to operate. When power is applied to the solenoid via a coil (supplied) the pneumatic pilot changes the spool position. When power is removed from the coil the internal spring will return the spool to it's original position. Over sized orifices are standard on these valves for maximum flow performance. Port Sizes up to 1 1/2" BSP.

 

PDF data sheet 4_11.pdf

1 2 3